AGP Front Mount Intercooler 2008+ Mitsubishi Evolution EVO X
Product Description
Enhance the performance of your 2008-up Mitsubishi Evolution X with the first front mount intercooler available. The AGP Turbo FMIC features tig welded constructed end tanks attached to a 20x12x3.5" bar and plate core. This assembly fits perfectly in the factory location and does NOT require you to remove or trim any portion of the stock bumper support. It also clears the factory lower under-tray so you do not need to remove it. It cools at 90-99% efficiency under almost all conditions and has less than .75psi pressure drop at 450 hp of airflow. You couldn't heat soak this if you tried.
Throughout our dyno testing on the Evo X, we kept seeing timing retard (knock) around 5000rpm with the factory intercooler and 91 octane gas, where the power would drop. Since we upgraded to this intercooler, we've noticed consistent power across the board due to a cooler air charge. Back to back pulls on the dyno now result in identical power curves due to less heat soak.
This is the same intercooler running on AGP's shop car, that so far has made over 430whp.
Includes -
20x12x3.5 bar and plate core Silicone hoses and clamps All necessary installation hardware
Throughout our dyno testing on the Evo X, we kept seeing timing retard (knock) around 5000rpm with the factory intercooler and 91 octane gas, where the power would drop. Since we upgraded to this intercooler, we've noticed consistent power across the board due to a cooler air charge. Back to back pulls on the dyno now result in identical power curves due to less heat soak.
This is the same intercooler running on AGP's shop car, that so far has made over 430whp.
Includes -
20x12x3.5 bar and plate core Silicone hoses and clamps All necessary installation hardware
